REG - Accsys Technologies - Total Voting Rights

Accsys TechnologiesAnnouncement

29/03/2019 14:51

RNS Number : 4642U
Accsys Technologies PLC
29 March 2019
 


 
29 March 2019
AIM: AXS
      Euronext Amsterdam: AXS
 
 
ACCSYS TECHNOLOGIES PLC

("Accsys" or "the Company")
 
Total Voting Rights
 
Further to the recent announcement of the issue of 70,175 new ordinary shares of €0.05 each in the capital of the Company pursuant to the Employment Benefit Trust, and pursuant to 5.6.1 of the Disclosure and Transparency Rules, the Company notifies the market of the following:
 
The issued share capital of the Company now consists of 117,988,305 ordinary shares of €0.05 each with voting rights.  No ordinary shares are held in treasury.
 
The above figure of 117,988,305 ordinary shares may be used by shareholders as the denominator for the calculations by which they will determine if they are required to notify their interest in, or a change to their interest in, the Company under the FCA's Disclosure and Transparency Rules.  This figure replaces and supersedes any figure previously announced.
 
 
ACCSYS TECHNOLOGIES PLC 

("Accsys" of "de Vennootschap")
 
Totaal aantal stemrechten
 
Naar aanleiding van de recente aankondiging van de uitgifte van 70,175 nieuwe gewone aandelen in het kapitaal van de Vennootschap van € 0,05 per aandeel op grond van de Employment Benefit Trust, en in naleving van 5.6.1 van de Disclosure and Transparency Rules, informeert de Vennootschap de markt over het volgende:
 
Het uitgegeven aandelenkapitaal van de Vennootschap bestaat thans uit 117.988.305 gewone stemgerechtigde aandelen van € 0,05 per aandeel. Er is geen sprake van ingekochte eigen aandelen.
 
Het is aandeelhouders toegestaan het bovengenoemde getal van 117.988.305 gewone aandelen te gebruiken als deler bij berekeningen voor het bepalen van de noodzaak om hun belang, of een verandering in hun belang, in de Vennootschap te melden onder de Disclosure and Transparency Rules van de FCA. Dit getal vervangt alle eerder aangekondigde getallen.
 
 
Ends
 
For further information, please contact:
 




Accsys Technologies PLC


Paul Clegg, CEO
Will Rudge, FD
Hans Pauli, Executive Director, Corporate Development


via MHP Communications




Numis Securities


Nominated Adviser:  Oliver Hardy
                                 
Corporate Broking:   Christopher Wilkinson
                                 Ben Stoop


+44 (0) 20 7260 1000
 




MHP Communications


Tim Rowntree
Kelsey Traynor


+44 (0) 20 3128 8100
 




Off the Grid
(The Netherlands)


Frank Neervoort
Yvonne Derske


+31 681 734 236
+31 222 379 666




 
Notes to editors:
 
Accsys Technologies PLC (www.accsysplc.com) is a chemical technology group whose primary focus is on the production of Accoya® wood and Tricoya® wood elements, technology licensing via its subsidiary, Titan Wood Limited, which has manufacturing operations in Arnhem, the Netherlands (through its subsidiary Titan Wood B.V.), a European office in London, United Kingdom, an American office in Dallas, Texas (via its subsidiary Titan Wood, Inc.) and technology licensing associated with the acetylation of wood elements via its subsidiary Tricoya Technologies Limited.  Any references in this announcement to agreements with Accsys shall mean agreements with either Accsys or its subsidiary entities unless otherwise specified.  Accsys Technologies PLC is listed on the London Stock Exchange AIM market and on Euronext Amsterdam, under the symbols 'AXS'. Accsys' operations comprise four principal business units: (i) Accoya® wood production; (ii) building and operating of Tricoya® wood chip acetylation plant in Hull; (iii) technology development, focused on a programme of continuous development of and improvements to the process engineering and operating protocols for the acetylation of solid wood and the development of technology for the acetylation of wood elements; and (iv) the licensing of technology for the production of Accoya® wood and Tricoya® wood elements across the globe.
Accoya® Wood (www.accoya.com) is produced using Accsys' proprietary patented acetylation technology that effectively converts sustainably grown softwoods and non-durable hardwoods into what is best described as a "high technology wood". Distinguished by its durability, dimensional stability and, perhaps most importantly of all, its reliability (in terms of consistency of both supply and quality), Accoya® wood is particularly suited to exterior applications where performance and appearance are valued. Moreover, the Accoya® wood production process does not compromise the wood's strength or machinability. The combination of dimensional stability, durability and retained strength means that Accoya® wood offers a wealth of new opportunities to architects, designers and specifiers. These benefits result in lower maintenance and total cost of ownership while using a highly sustainable and environmentally responsible building material. For a full archive of Accoya® news, visit www.accoya.com/news.
Tricoya® Wood Elements (www.tricoya.com) are produced using Accsys' proprietary technology for the acetylation of wood chips and particles for use in the fabrication of panel products such as medium density fibreboard and particle-board. These products demonstrate enhanced durability and dimensional stability which allow them to be used in a variety of applications that were once limited to solid wood or man-made products. Exploitation of Accsys' proprietary technology relating to Tricoya® Wood Elements is carried out through Tricoya Technologies Limited.  Tricoya® Wood Elements are lauded as the first major innovation in the wood composites industry in more than 30 years.
Wood Acetylation is a process which increases the amount of naturally occurring 'acetyl' molecules in wood, thereby changing its physical properties. When carried out to a sufficient level throughout the wood, this process protects wood from rot by making it "inedible" to most micro-organisms and fungi, without - unlike conventional treatments - making it toxic. It also greatly reduces the wood's tendency to swell and shrink, making it less prone to cracking and ensuring that, when painted, it requires dramatically reduced maintenance.
 
Accsys Technologies is the trading name of Titan Wood Limited. Accoya®, Tricoya® and the Trimarque Device are registered trademarks owned by Titan Wood Limited ("TWL"), a wholly owned subsidiary of Accsys Technologies PLC, and may not be used or reproduced without written permission from TWL, or in the case of the Tricoya® registered trademark, from Tricoya Technologies Limited, a subsidiary of TWL with exclusive rights to exploit the Tricoya® brand.
 




This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact rns@lseg.com or visit www.rns.com.
 
END
 
 
TVRPGURAWUPBURB