REG - Ariana Resources PLC - Significant Drilling Results at Salinbas & Ardala

Ariana ResourcesAnnouncement

19/06/2023 07:00

For best results when printing this announcement, please click on link below:
http://newsfile.refinitiv.com/getnewsfile/v1/story?guid=urn:newsml:reuters.com:20230619:nRSS0762Da&default-theme=true

RNS Number : 0762D  Ariana Resources PLC  19 June 2023

19 June 2023

AIM: AAU

SIGNIFICANT DRILLING RESULTS AT SALINBAS AND ARDALA

Ariana Resources plc ("Ariana" or "the Company"), the AIM-listed mineral
exploration and development company with gold mining interests in Europe, is
pleased to announce a further set of results from the ongoing drilling
programme at Salinbas and to provide a general update on other exploration
across the wider project area.  The project is operated via Zenit Madencilik
San. ve Tic. A.S. ("Zenit") in partnership with Proccea Construction Co. and
Ozaltin Holding A.S. and is 23.5% owned by Ariana.

Highlights:

·    Completion of the deepest hole drilled into the Ardala Porphyry to
date (745.3m), with significant intercept of:

o  461.8m @ 0.22% Cu + 0.23g/t Au and 155ppm Mo from 283.5 metres.

·    New "contact-mineralisation" intercepted on the periphery of the
Ardala porphyry, returning:

o  8.2m @ 1.27% Cu + 0.95g/t Au + 22.4g/t Ag + 0.16% Zn from 46.6 metres.

o  Including 0.3m @ 12.92% Cu from 52.9 metres.

·    Infill drilling within the Salinbas resource area progressing well,
with best results to date including:

o  12.8m @ 1.34g/t Au + 3.3g/t Ag

o  10.7m @ 1.19g/t Au + 16.5g/t Ag

o  5.8m @ 1.43g/t Au + 25.0g/t Ag

·    Over 12,000 metres of drilling completed since the drilling programme
commenced in late 2021.

To read a pdf version of the release, please click here:
http://www.rns-pdf.londonstockexchange.com/rns/0762D_1-2023-6-18.pdf
(http://www.rns-pdf.londonstockexchange.com/rns/0762D_1-2023-6-18.pdf)

Dr. Kerim Sener, Managing Director, commented:

"These results represent another major development for the Salinbas Project as
a whole.  We have now confirmed the presence of a significantly gold-rich
core to the Ardala Porphyry system in the deepest and one of the most
well-mineralised holes drilled on the project to date, yielding almost half a
kilometre of continuous copper, gold and molybdenum mineralisation, to a total
depth of approximately three-quarters of a kilometre, ending in
mineralisation.  Importantly, this mineralisation is partly encountered
outside of the zone previously identified as the high-grade potassic core of
the porphyry, suggesting that our understanding of the overall potential is
only just beginning.  This reaffirms the high prospectivity of the area and
further demonstrates the need to continue testing both the porphyry and its
immediate environs, which have recently yielded significant high-grade copper
and gold results in "contact-mineralisation" zones proximal to the margins of
the intrusions.

In conjunction with these impressive results from the porphyry area, in-fill
drilling undertaken at the Salinbas area has continued to encounter the
Salinbas mineralised horizon, largely where previously modelled, demonstrating
the continuity of both gold and silver grade, in places over significant
greater than 10m intervals.  We have also encountered significant new
mineralisation just on the margins of the previously defined Salinbas resource
area, including one hole that intercepts good mineralisation right at surface,
as we had predicted.  In addition, several holes reported on previously, but
lacking sufficient analytical data at the time, identified zones of very
high-grade base metal mineralisation towards the Ardala Porphyry on the
southern flank of the AS Zone.

We are now about halfway through a substantially expanded drilling programme
which allows for up to 22,000m of drilling.  Drilling also remains underway
at Hizarliyayla using a second drill-rig and the initial results of this
drilling will be reported on separately from this release.  The drilling
programme is continuing to be funded through US$8 million in new capital
provided to the project by Ozaltin Holding A.S."

The information contained within this announcement is deemed by the Company to
constitute inside information as stipulated under the Market Abuse Regulations
(EU) No. 596/2014 as it forms part of UK Domestic Law by virtue of the
European Union (Withdrawal) Act 2018 ("UK MAR").

Drilling Programme

The following update comprises the latest drilling results from the Salinbas
Project (Table 1 & 2). The ongoing programme has remained active since
late 2021, with the occasional break for bad weather and inaccessibility
issues.  The previous results for drilling undertaken largely during the
2021/2022 period were announced on 25 January 2023.

The Salinbas Project, comprising the mineralisation encountered at Salinbas
and Ardala, is located in north-eastern Turkey within the multi-million ounce
Artvin Goldfield.  Drilling has been focused in the Ardala area and the zone
connecting Ardala with Salinbas since November 2021 (Figure 1), with a total
of 11,114.9m drilled (including the first 5 holes at the Hizarliyayla prospect
to the south) to date across 60 HQ diamond drill holes, with the top of the
hole in PQ due to a thick colluvium layer.

Currently, there are two drill rigs operating simultaneously across
Salinbas-Ardala and at Hizarliyayla.  The average depth of drilling has been
approximately 200m, with a minimum depth of 20.5m and a maximum depth of
745.3m.  Of the drilling completed to date in the Ardala and Salinbas areas,
13 holes were angled at between 50(o) and 75(o), with the rest drilled
vertically.

Figure 1: Map showing the completed and planned drillhole collar positions for
the Salinbas Project.  The location of all historic drill holes on the
project is also shown.

 

The ongoing drilling programme at Salinbas has three primary objectives:

 

1)  Continue exploration step-out drilling between the known limits of the
Salinbas deposit and the Ardala porphyry.  A 500m gap known as the AS Zone
between the Salinbas and Ardala mineralised zones still requires further drill
testing.  Drilling initially completed in 2019 (for 2,210m as announced on 11
July 2019), suggested that the AS Zone probably contained other significant
forms of precious and base-metal mineralisation including additional
mineralised porphyries, skarnoid contact mineralisation, and
highly-mineralised breccia structures;

 

2)  Test for probable lateral and depth extensions of the Ardala Porphyry;

 

3)  Complete the first phase of resource infill drilling at the
north-eastern end of the Salinbas deposit, within the AS Zone.

 

In addition, resource infill drilling on the Salinbas western extent is now
well underway. Most holes have intercepted mineralisation where expected.
These holes include:

·    SALH087 12.8m @ 1.34g/t Au + 3.3g/t Ag - from surface

·    SALH077 10.7m @ 1.19g/t Au + 16.5g/t Ag - from 82 metres

·    SALH090 3.5m @ 1.28g/t Au + 160.6g/t Ag - from 63.8 metres

 

Several other critical resource holes are still pending assay, with further
holes awaiting drilling in the coming months.  Additional holes will be added
to this drilling programme for the purpose of acquiring specific material for
further metallurgical test work.

 

All historic drilling, up to and inclusive of 2019 has defined the current
JORC Measured, Indicated and Inferred Resource of 1.5 million ounces of gold
(as announced on 30 July 2020) split between the high-grade Salinbas deposit
and the lower-grade, high-tonnage Ardala Porphyry Complex. To date, 30,725.55m
of drilling has been completed across 189 holes at the Salinbas Project.

 

All multi-element assay results have now returned for drill hole ARD068, which
is to date Zenit's deepest hole on the Project (745.3m).  The objective of
the drill hole was to test the deep core of the Ardala Porphyry, which it
successfully intercepted from 246 metres to the end of the hole. Significant
mineralisation was intercepted from 283.5 metres to the end of the hole, for
461.8m @ 0.22% Cu + 0.23g/t Au + 155ppm Mo.

 

Other notable results from the ongoing drilling campaign also include several
highly anomalous intercepts from base-metal rich "contact-mineralisation"
occurring on the margins of the Ardala Porphyry, porphyry breccia and the
Ziyarettepe limestone units. Examples of successful holes include:

 

·    ARD067 8.2m @ 1.27% Cu + 0.95g/t Au + 22.4g/t Ag + 0.16% Zn from 46.6
metres

o  Including 0.3m @ 12.92% Cu

·    ARD065 5.8m @ 1.43g/t Au + 25g/t Ag

 

Table 1: Significant multi-element intercepts calculated for all 2023 drilling
to date, using a 0.2% Cu minimum cut-off and allowing for up to 1m internal
dilution. Intercepts calculated using KML data and supported by external
laboratory results. * 7.5m maximum internal dilution applied for the
calculation of this intercept within the Ardala Porphyry (in bold).

 

 Hole ID    From (m)  To (m)  Interval (m)  Au (g/t)  Ag (g/t)  Mo (g/t)  Cu (%)  Zn (%)
 ARD064     340.0     344.7   4.7           0.60      1.32      2         0.12    0.09
            356.6     359.8   3.2           0.12      1.57      2         0.11    0.21
 ARD066     27.4      38.4    11.0          0.40      14.43     19        0.33    0.25
 ARD067     46.6      54.8    8.2           0.95      22.41     9         1.27    0.16
 Including  52.9      53.2    0.3           0.15      3.29      9         12.92   0.45
 ARD068     160.6     166.7   6.1           0.11      0.25      1         0.13    0.06
            170.3     177.3   7.0           0.22      0.60      4         0.11    0.14
            200.1     204.0   3.9           0.13      0.58      9         0.12    0.04
            283.5     294.5   11.0          0.08      0.31      127       0.16    0.00
            306.5     312.7   6.2           0.12      0.63      168       0.16    0.04
 ARD068*    283.5     745.3   461.8         0.23      0.50      155       0.22    0.00
 ARD069     158.7     163.6   4.9           0.13      1.24      9         0.21    0.03
 ARD070     47.4      52.4    5.0           0.03      3.79      9         0.16    0.10
 SALH077    101.1     111.1   10.0          0.03      0.85      11        0.44    1.04

 

Table 2: Significant gold and silver only intercepts calculated for all 2023
drilling to date, using a 0.5g/t Au minimum cut-off and allowing for up to 1m
internal dilution. Intercepts calculated using KML data and supported by
external laboratory results.

 

 Hole ID  From (m)  To (m)  Length (m)  Au (g/t)  Ag (g/t)
 ARD062   41.2      44.0    2.8         2.20      20.9
 ARD064   153.3     155.9   2.6         0.67      5.1
 ARD065   152.7     158.5   5.8         1.43      25.7
 ARD067   46.6      48.8    2.2         3.36      78.4
 ARD068   91.5      95.0    3.5         2.17      51.0
          506.1     508.6   2.5         0.63      0.6
          563.3     565.3   2.0         0.66      0.5
 ARD069   128.5     131.2   2.7         1.90      3.0
          43.5      46.3    2.8         1.70      8.6
 ARD070   2.0       4.0     2.0         2.13      4.9
 SALH077  82.0      92.7    10.7        1.19      16.5
 SALH082  0         3.1     3.1         1.12      3.2
 SALH087  0         12.8    12.8        1.34      3.3
 SALH088  0         2.0     2.0         1.52      5.3
 SALH090  63.8      67.3    3.5         1.28      160.6
          58.1      60.1    2.0         0.72      34.1

 

Samples extracted from the Salinbas Project drilling programme have been sent
periodically in batches to the Kiziltepe Mine Laboratory ("KML") for
processing and analysis.  This has resulted in temporary delays and backlogs
of pending samples for the Salinbas Project as a whole.  The requirement to
introduce the Salinbas samples slowly was undertaken to mitigate high sample
flow from other higher priority projects and to allow for sufficient
calibration and testing of new instruments introduced to the mine laboratory
through an expansion completed during 2020/2021.  The day-to-day operational
samples from the Kiziltepe Mine, as well as the significant ongoing flow of
samples from the development work underway at the Tavsan Project has also
taken priority over the Salinbas analyses.

 

To date, a total of 7,676 sample results for 6,570m of sampled drill core has
been returned from the KML (plus 1,125 QA/QC samples).  Approximately 10% of
all analysed samples are being analysed by ALS Global in Izmir as an external
laboratory check as part of the QA/QC procedures used for the project.
Results are pending for a further 613 samples (including 129 QA/QC samples).

Sampling and Assaying Procedures

All diamond drill core is currently being processed at the Kiziltepe mine site
and analysed at the Kiziltepe Mine Laboratory ("KML").  Results are assessed
systematically and are grouped according to individual mineralised zones at
the Salinbas Project.

 

HQ size drill-core samples from the drilling programme at Salinbas and Ardala
were cut in half by a diamond saw and sent for analysis in batches in line
with the Company's quality control procedures.  Core recovery for all
drilling conducted at Salinbas during this campaign was 82%, for a total of
6,833 measurements.  A total of 8,134 samples (including 1,322 QA/QC samples)
were submitted to KML.  A total of 1,057 samples (including 106 QA/QC
samples) were submitted to ALS Global, Izmir as an external laboratory check
to add confidence to KML results, particularly during laboratory expansion
works.

 

QA/QC sample insertion rates vary depending on the batch size accepted by the
laboratory. Ariana sampling protocol requires insertion of 4 QA/QC samples per
batch to include 1 blank, 1 CRM, 1 field duplicate and 1 pulp duplicate to
assess the accuracy and precision of all stages of the sampling and analysis.
During the 2021-2023 drilling, Zenit QA/QC protocol required 1 blank, 1 CRM
and 1 field duplicate and over 10% samples analysed at external laboratory.
The Zenit QA/QC protocol is under review by both Ariana and Zenit teams
following the laboratory upgrade.

 

Between 2020 and 2021, KML has undergone an extensive expansion to meet the
significant demands for sample assaying, from both the mining and exploration
teams. This expansion is complete with the onsite laboratory, now housing
seven furnaces, two ICP-OES instruments, two Atomic Absorption spectrometers
(AAS), three drying ovens, three crushers and three pulverisers. The
laboratory upgrades have allowed for a doubling of sampling throughput (70
samples per day to 135). The two major upgrades for 2021 included the addition
of 1) a multi-element ICP-OES (Perkin Elmer Avio 550) analyser, and 2) an
Elementrac CS-I sulphur-carbon analyser. The ICP-OES provides the team with a
full suite of elements on selected samples (as opposed to just gold and
silver).

 

However, new operating procedures are currently being internally reviewed and
calibrations of the new instruments are being assessed. As part of this, the
laboratory team are sending in excess of 10% of their crushed rejects from
selected drill core samples to ALS Global in Izmir for check assays, with c.9%
of the Salinbas samples also analysed at ALS.  Zenit's internal QA/QC data
and sample duplicates have been reviewed, and are considered approved for
Ariana's reporting purposes.  In addition, since October 2022 KML has been
accredited by the Turkish Accreditation Agency (TÜRKAK) with "TS EN ISO/IEC
17025:2017 General Requirements for the Competence of Experimental and
Calibration Laboratory".

 

All samples were assayed for gold using a 30g fire assay.  Multi-element ICP
was used for copper, lead, molybdenum and zinc analyses.  Reviews of the
assay results have determined that all Quality Control and Quality Assurance
samples (blanks, standards and duplicates) passed the required quality control
checks established by the Company, with duplicate samples showing excellent
correlation.  Laboratory sample preparation, assaying procedures and chain of
custody are appropriately controlled.  Zenit maintains an archive of half
core samples and a photographic record of all cores for future reference.

 

Contacts:

 

 Ariana Resources plc                           Tel: +44 (0) 20 7407 3616
 Michael de Villiers, Chairman
 Kerim Sener, Managing Director
 Beaumont Cornish Limited (Nominated Adviser)   Tel: +44 (0) 20 7628 3396
 Roland Cornish / Felicity Geidt
 Panmure Gordon (UK) Limited (Joint Broker)     Tel: +44 (0) 20 7886 2500
 John Prior / Hugh Rich / Atholl Tweedie
 WHIreland Limited (Joint Broker)               Tel: +44 (0) 207 2201666

 Harry Ansell / Katy Mitchell / George Krokos

 Yellow Jersey PR Limited (Financial PR)        Tel: +44 (0) 7983 521 488
 Dom Barretto / Shivantha Thambirajah /         arianaresources@yellowjerseypr.com (mailto:arianaresources@yellowjerseypr.com)

Bessie Elliot

 

Editors' Note:

 

The information that relates to Exploration Results is based upon information
compiled by Mr Zack van Coller BSc (Hons), Special Projects Geologist, Ariana
Resources plc. Mr van Coller has sufficient experience which is relevant to
the style of mineralisation and type of deposits under consideration and to
the activity which he is undertaking to qualify as a Competent Person as
defined by the 2012 edition of the Australasian Code for the Reporting of
Exploration Results, Mineral Resources and Ore Reserves (JORC Code). Mr van
Coller has over 10 years of relevant experience in the Technical Assessments
of Mineral Properties. Mr van Coller consents to the inclusion in the report
of the matters based on his information in the form and context in which it
appears.

 

The information in this announcement that relates to exploration results is
based on information compiled by Dr. Kerim Sener BSc (Hons), MSc, PhD,
Managing Director of Ariana Resources plc. Dr. Sener is a Fellow of The
Geological Society of London and a Member of The Institute of Materials,
Minerals and Mining and has sufficient experience relevant to the styles of
mineralisation and type of deposit under consideration and to the activity
that has been undertaken to qualify as a Competent Person as defined by the
2012 edition of the Australasian Code for the Reporting of Exploration
Results, Mineral Resources and Ore Reserves (JORC Code) and under the AIM
Rules - Note for Mining and Oil & Gas Companies.  Dr. Sener consents to
the inclusion in the report of the matters based on his information in the
form and context in which it appears.

 

About Ariana Resources:

Ariana is an AIM-listed mineral exploration and development company with an
exceptional track-record of creating value for its shareholders through its
interests in active mining projects and investments in exploration companies.
Its current interests include gold production in Turkey and copper-gold
exploration and development projects in Cyprus and Kosovo.

 

The Company holds 23.5% interest in Zenit Madencilik San. ve Tic. A.S. a joint
venture with Ozaltin Holding A.S. and Proccea Construction Co. in Turkey which
contains a depleted total of c. 2.1 million ounces of gold and other metals
(as at February 2022). The joint venture comprises the Kiziltepe Mine and the
Tavsan and Salinbas projects.

 

The Kiziltepe Gold-Silver Mine is located in western Turkey and contains a
depleted JORC Measured, Indicated and Inferred Resource of 222,000 ounces gold
and 3.8 million ounces silver (as at February 2022). The mine has been in
profitable production since 2017 and is expected to produce at a rate of
c.20,000 ounces of gold per annum to at least the mid-2020s. A Net Smelter
Return ("NSR") royalty of 2.5% on production is being paid to Franco-Nevada
Corporation.

 

The Tavsan Gold Mine is located in western Turkey and contains a JORC
Measured, Indicated and Inferred Resource of 307,000 ounces gold and 1.1
million million ounces silver (as at November 2022). Following the approval of
its Environmental Impact Assessment and associated permitting, Tavsan is being
developed as the second gold mining operation in Turkey.  Construction
progress is temporarily suspended pending the outcome of a local court
decision pertaining to the EIA.  A NSR royalty of up to 2% on future
production is payable to Sandstorm Gold.

 

The Salinbas Gold Project is located in north-eastern Turkey and contains a
JORC Measured, Indicated and Inferred Resource of 1.5 million ounces of gold
(as at July 2020). It is located within the multi-million ounce Artvin
Goldfield, which contains the "Hot Gold Corridor" comprising several
significant gold- copper projects including the 4 million ounce Hot Maden
project, which lies 16km to the south of Salinbas. A NSR royalty of up to 2%
on future production is payable to Eldorado Gold Corporation.

 

Ariana owns 100% of Australia-registered Asgard Metals Fund ("Asgard"), as
part of the Company's proprietary Project Catalyst Strategy. The Fund is
focused on investments in high-value potential, discovery-stage mineral
exploration companies located across the Eastern Hemisphere and within easy
reach of Ariana's operational hubs in Australia, Turkey and the UK.

 

Ariana owns 75% of UK-registered Western Tethyan Resources Ltd ("WTR"), which
operates across south-eastern Europe and is based in Pristina, Republic of
Kosovo. The company is targeting its exploration on major copper-gold deposits
across the porphyry-epithermal transition.  WTR is being funded through a
five-year Alliance Agreement with Newmont Corporation (www.newmont.com
(http://www.newmont.com) ) and is separately earning-in to 85% of the Slivova
Gold Project.

 

Ariana owns 58% of UK-registered Venus Minerals Ltd ("Venus") which is focused
on the exploration and development of copper-gold assets in Cyprus which
contain a combined JORC Indicated and Inferred Resource of 17Mt @ 0.45% to
1.10% copper (excluding additional gold, silver and zinc.

 

Panmure Gordon (UK) Limited and WH Ireland Limited are brokers to the Company
and Beaumont Cornish Limited is the Company's Nominated Adviser.

 

For further information on Ariana, you are invited to visit the Company's
website at www.arianaresources.com (http://www.arianaresources.com) .

 

 

Glossary of Technical Terms:

 

"Ag" chemical symbol for silver;

 

"Au" chemical symbol for gold;

 

"Cu" chemical symbol for copper;

 

"Mo" chemical symbol for molybdenum;

 

"Pb" chemical symbol for lead;

 

"g/t" grams per tonne;

 

"KML" Kiziltepe Mine Laboratory;

 

"m" Metres;

 

"ppm" parts per million;

 

"Zn" chemical symbol for zinc.

 

Ends.

This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact
rns@lseg.com (mailto:rns@lseg.com)
 or visit
www.rns.com (http://www.rns.com/)
.

RNS may use your IP address to confirm compliance with the terms and conditions, to analyse how you engage with the information contained in this communication, and to share such analysis on an anonymised basis with others as part of our commercial services. For further information about how RNS and the London Stock Exchange use the personal data you provide us, please see our
Privacy Policy (https://www.lseg.com/privacy-and-cookie-policy)
.   END  DRLEAPKPFLKDEFA