REG - Botswana Diamonds - Macro diamonds recovered from Marsfontein sample
RNS Number : 2841OBotswana Diamonds PLC29 May 202029th May 2020
Botswana Diamonds PLC
("Botswana Diamonds" or the "Company")
Over 100 macro diamonds recovered from Marsfontein bulk sample
Botswana Diamonds ("BOD"), the AIM and BSE listed diamond explorer is pleased to announce that the company has concluded the processing of two bulk samples taken from the Marsfontein diamond development project in the Limpopo Province of South Africa. The samples comprised 58-tons of fresh high-interest kimberlite and 62-tons of kimberlitic material from one of the residual stockpiles, known as 'Dump E'.
Headlines
· 87 macro diamonds were recovered from the fresh kimberlite giving a modelled grade of 50cpht*.
· 24 macro diamonds were recovered from Dump E giving a modelled grade of 16cpht*.
* Headline grades are quoted at a +1.5 mm screen bottom size cut off
James Campbell, Managing Director commented "This bulk sampling campaign, which was carried out with the company's royalty mining contractor Eurafrican Diamond Corporation, had two objectives. The first was to test the grade of the fresh kimberlite and the second was to confirm the grades of one of the mine dumps. Both were achieved, and proof of the fresh kimberlite grade paves the way for further exploration work on Marsfontein to target potential blows. The kimberlite grade is aligned with those achieved at Klipspringer mine and Thorny River, which are both nearby, indicating the considerable extent of the kimberlite dyke system. Options will be investigated on exploitation of the dumps once the nationwide lock down in South Africa is lifted and a sense of normality returns to diamond markets, post the global Covid-19 pandemic crisis."
The results of the bulk sampling programme, including modelled results are illustrated in the table below:
Source
Sample Size (tons)
No of stones
Carats
Raw Grade (cpht) +1.7mm BCOS
Average stone size cts
Largest stone cts
Modelled Grade (cpht) +1.5mm BCOS
Modelled Grade (cpht) +1.0mm BCOS
Kimberlite
58
87
16.53
28.5
0.19
2.28
50
53
Dump E
62
24
6.77
10.9
0.28
1.38
16
21
The fresh kimberlite was identified as originating from the M8 dyke system, which extends to the Klipspringer diamond mine c.11 km to the west and the company's Thorny River project to c.5 km the east. The Dump E material was predominantly a mix of M8 kimberlite and dolerite.
Both samples were treated at Eurafrican Diamond Corporation's processing facility. They were subjected to primary and secondary crushing, pan plant concentration, grease and x-ray recovery and jigging with a nominal bottom cut-off of +1.7mm. These tailings have been retained for future analyses, as required.
The grade modelling was undertaken by Interlaced Consulting. It assumed a conventional kimberlite processing plant, including a re-crush circuit (to recover more finer diamonds).
Modelled results determined are in line with previous estimates and diamond recoveries from the nearby Klipspringer diamond mine.
Work will re-commence at Marsfontein and Thorny River as-soon-as Covid-19 restrictions are lifted to enable travel to the work areas.
Glossary
Diamond grades are always stated along with a Bottom Cut-Off Size ('BCOS'). Diamond sizes follow a logarithmic distribution with a peak in the finer sizes and a tail towards the coarser sizes. It is a commercial decision selecting the bottom cut-off size and typically for kimberlite processing plants this is +1.0 or +1.5mm.
'CPHT' refers to Carats Per Hundred Tons and 'CTS' refers to carats. Diamonds are weighed in carats. A carat is 0.2 grams and the name comes from the fruit of the carob seed, a seed commonly found in the Kimberley area of South Africa, one of the most prolific historical diamond producing areas.
This release has been approved by James Campbell, Managing Director of Botswana Diamonds plc, a qualified geologist (Pr.Sci.Nat), a Fellow of the Southern African Institute of Mining and Metallurgy, a Fellow of the Institute of Materials, Metals and Mining (UK) and with over 34-years' experience in the diamond sector.
This announcement contains inside information for the purposes of Article 7 of Regulation (EU) 596/2014. The person who arranged for the release of this announcement on behalf of the Company was James Campbell, Director
A copy of this announcement is available on the Company's website, at www.botswanadiamonds.co.uk
ENDS
Enquiries:
Botswana Diamonds PLC
John Teeling, ChairmanJames Campbell, Managing Director
Jim Finn, Director
+353 1 833 2833
+27 83 457 3724
+353 1 833 2833
Beaumont Cornish - Nominated Adviser
Michael CornishRoland Cornish
+44 (0) 020 7628 3396Beaumont Cornish Limited - Broker
Roland CornishFelicity Geidt
+44 (0) 207 628 3396
Novum Securities Limited - Joint Broker
Colin Rowbury+44 (0) 20 399 9400
Blytheweigh - PR
Megan Ray
Rachael Brookes
+44 (0) 207 138 3206
+44 (0) 207 138 3222
+44 (0) 207 138 3203
Teneo
Luke Hogg
Alan Tyrrell
Thomas Shortall
+353 (0) 1 661 4055
+353 (0) 1 661 4055
+353 (0) 1 661 4055
This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact rns@lseg.com or visit www.rns.com.ENDDRLQVLFLBELZBBX
Recent news on Botswana Diamonds
See all newsREG - Botswana Diamonds - Second significant anomaly discovered in Kalahari
AnnouncementREG - Botswana Diamonds - AI to be applied to our Botswana database
AnnouncementREG - Botswana Diamonds - Unaudited Interim Statement and Financial Results
AnnouncementREG - Botswana Diamonds - Granting of Prospecting License in Eswatini
AnnouncementREG - Botswana Diamonds - Results of Annual General Meeting
Announcement