Katoro Enters JV on Strategic Iron Opportunity
20/09/2022 07:00
For best results when printing this announcement, please click on link below:
http://newsfile.refinitiv.com/getnewsfile/v1/story?guid=urn:newsml:reuters.com:20220920:nRST9298Za&default-theme=true
RNS Number : 9298Z Katoro Gold PLC 20 September 2022
Katoro Gold plc (Incorporated in England and Wales)
(Registration Number: 9306219)
Share code on AIM: KAT
ISIN: GB00BSNBL022
("Katoro" or "the Company")
Dated: 20 September2022
Katoro Gold PLC ('Katoro' or the 'Company')
KATORO GOLD ENTERS INTO UNINCORPORATED JOINT VENTURE ON STRATEGIC
IRON PRODUCTION OPPORTUNITY
Katoro Gold PLC ('Katoro' or 'the Company') (AIM: KAT), the strategic and
precious minerals exploration and development company, is pleased to announce
that it has entered into a conditional agreement ('the Agreement') with Trans
Namibian Mining and Minerals (Pty) Ltd ('TNMM') to undertake
exploration/development activities on TNMM's iron ore project in Namibia.
Below is an overview of the Agreement and Project. Readers are encouraged to
review the announcement in its entirety, including the section headed
'Important Information for Shareholders'.
OVERVIEW OF THE AGREEMENT AND PROJECT
Joint Venture
Katoro has entered into a binding conditional agreement to form a 50/50
unincorporated joint venture ('JV') with TNMM (and together with Katoro, the
'JV Partners'). The JV seeks to continue the development of TNMM's iron ore
project.
The Agreement provides Katoro with a pre-emptive right to acquire up to 60% of
the total issued share capital of TNMM and the same percentage of all claims
on the shareholder loan account against TNMM should the shareholders of TNMM
decide to sell their interest in TNMM.
Project Overview
The TNMM Properties comprise the four farms owned by TNMM in Namibia (the
'Project' or the 'Trans Namibian Iron Ore Venture') and known as Naruchas,
Kanubeb Wes, Kanubeb Oos and Kanubeb. The most exploration work undertaken
to date has been on an iron ore project based on the Naruchas farm
('Naruchas').
The deposit on the Naruchas farm is being explored for medium- to high-grade
sedimentary iron ore. The iron ore on Naruchas occurs as a black to dark-grey
laminated ore with massive magnetite and hematite mineralisation.
The JV Partners plan to continue the exploration and potential development of
deposits of iron ore and any other minerals from the TNMM Properties. TNMM
also holds the associated prospecting licenses issued by the Government of the
Republic of Namibia (the 'TNMM Rights'). TNMM is the current operator of the
Project and holder of the rights over 100% of the project.
Historical Estimate
A Historical Estimate of mineral resources at Naruchas, dated October 2013,
was completed by Sheron Kaviua, an independent consultant to TNMM, in
compliance with the SAMREC Code and is summarised in Table 1. The estimate is
defined as a Historical Estimate by virtue of being prepared before Katoro
entering into the agreement to acquire an effective interest in the property
containing the Naruchas deposit.
In situ Ore In situ Ore Run of Mine In situ Grades In situ Grades
Category BCMS Mt Mt Fe% Fe(2)O(3)%
Measured 13.7 61.8 61.8 30.5 43.6
Indicated 5.5 24.7 24.7 30.9 44.1
Inferred 2.9 12.8 12.8 31.9 45.6
Total 22.1 99.4 99.4 30.8 44.0
Table 1: Mineral Resource statement as of October 2013 for the iron ore
project on the Naruchas farm (Kaviuola, S. 2013.).
The source and date for the Historical Estimate is a report titled: 'Mineral
Resource and Ore Reserve Statement' compiled by S. Kaviua for Trans-Namibian
Mining and Minerals (Pty) Ltd and dated 31 October 2013.
Katoro has not independently verified the Historical Estimate and no Competent
Person (as defined in the SAMREC Code, 2016 Edition) has done sufficient work
to classify this as a 'current Mineral Resource' and therefore Katoro is not
treating the Historical Estimate as a current Mineral Resource Estimate.
Further, the Historical Estimate was classified according to the SAMREC Code
in place at the time it was produced, being the 2007 Edition as amended in
2009. This code has been superseded by the SAMREC Code, 2016 Edition, and the
reader should note that the most recently published SAMREC Code is more
rigorous in its estimation and classification protocols than the previous
codes, and the Historical Estimate should be re-evaluated in terms of these
later codes.
Consequently, no reliance can be placed on the Historical Estimate as no
assurance can be given that any particular grade, stripping ratio or grade of
minerals will in fact be realised or that any current Mineral Resource
Estimate or Ore Reserve will ever be delineated or that planned future
exploration and study programs will result in profitable commercial mining
operations.
The Historical Estimate was calculated based on the technical programme and
analysis summarised below.
High resolution airborne magnetic data was purchased from the Ministry of Mine
and Energy to identify magnetic iron formations and were utilised to identify
target areas, especially where mapping has confirmed outcropping iron
formations. Additionally, ground magnetic surveys were carried out and all
survey lines together with anomalous readings, were plotted on topographical
maps and used for selecting sites for Reverse Circulation ('RC') drilling.
A total of 25 RC boreholes were drilled on two separate drilling campaigns in
2013 by hard rock drilling on farm Naruchas. The boreholes were drilled on an
irregular grid, with the drills pacing ranging from 20m in the north-east to
500m in the southeastern part of Naruchas. A total of 1,307m was drilled at an
average depth of 52.2m. The aim of the drilling was to test the continuity of
the iron ore formations down depth for estimation purposes and to understand
their occurrence. At the drill site, 1m sample intervals were collected from
the cyclone and then riffle split to obtain two samples A and B, each weighing
250g. Drill chips were also collected and placed into chip trays for
geological logging.
All samples taken during RC drilling campaigns were assayed using NITON
handheld XRF spectrometer for screening only. Samples exceeding 25% Fe (32%
Fe(2)O(3) equivalent) were selected and sent for analysis at Acts
laboratories. A total of 50 drill chip samples were selected and submitted as
well. The samples were checked, verified, then crushed using a jaw crusher
before splitting to obtain representative samples. The representative samples
were then mill pulverised prior to analysis via wavelength dispersive X-Ray
Fluorescence Spectroscopy. Certified reference materials, duplicates and
blanks were incorporated in the testing procedure to ensure the integrity of
results.
No samples were analysed for specific gravity ('sg;) from farm Naruchas, with
an assumed sg of 4.5t/m(3) used for the mineralised iron formation and
3.0t/m(3) for unmineralised lithologies.
Resource estimation was completed using MineSight software and followed a
relatively typical process. Lithological models were developed for
carbonates, quartzites, diamictites, alluvial sands and the mineralised iron
formation. These were based on surface mapping, grab sampling and drilling
data, with structural planes also modelled. Iron grades were observed to drop
sharply at lithological boundaries, and the cut-off could be described as
geological; in practice, a 15% Fe cut-off was applied in combination with
minimum widths for the iron formation of 2m. Any iron formation not meeting
these criteria was reclassified as diamictite.
The block models were built using a 100m x 100m x 25m blocks (L x W x H), a
tighter spacing in general than the drilling, which was on average at 250m
spacings. The block model was subsequently coded using the iron formation
lithological model and IDW2 interpolation, with a primary search ellipse of
2,000 x 2,000 x 100m for the x, y and z search directions respectively.
The classifications of the Historical Estimate were done on the following
basis:
· Inferred: mapped, sampled and drilled on a drill spacing of 500m -
1,000m and a depth of -75 to -100 levels
· Indicated: mapped, sampled and drilled on a drill spacing of 250m -
500m and a depth of -50 to -75 levels
· Measured: mapped, sampled and drilled on a drill spacing of 50m -
250m and a depth of 0 to -50 levels
There are no more recent estimates or data available to the Company's
knowledge.
In addition to the Naruchas iron ore, the Kanubeb Wes, Kanubeb Oos and Kanubeb
farms are in early phases of exploration for copper deposits.
Work Programme and Budget
The JV Partners will, in accordance with the provisions of the JV agreement,
assess all work done to date and agree on an appropriate development budget
and work programme to:
· advance the Project to a level where it will qualify as a bankable
project, and
· procure appropriate debt, project and equity funding from prospective
investors for the purposes of developing, constructing and commissioning a
producing mine capable of producing a targeted c. 3 million tonnes of ore
per annum, should further development and exploration work return positive
results.
Katoro does not have any funding obligation to the JV other than it shall be
obliged to procure the funding required in respect of all expenditure of the
JV. For the avoidance of doubt, this does not commit Katoro to directly
provide the funding; the obligation is limited to procurement only. In the
event that Katoro does not or cannot procure such funding, the JV will unwind
and Katoro will have no further interest in the Project.
Executive Chairman of Katoro, Louis Coetzee, says: "This JV represents an
exciting investment opportunity for the Company with the possibility of
near-term value uplift.
"Our initial objective is to rapidly determine the work programme and budget
that will be required to advance the project to bankability status. Based on
the preliminary evaluation and review of the substantial amount of historic
work done to date on the Project, we believe that this can be achieved within
a relatively short timeframe and with minimal rework and/or additional work on
the Project. A significant number of the required licenses and/or permits are
also already in place, which will make the process towards achieving industry
standard bankability significantly easier and quicker.
"The JV also includes exploration rights that cover a number of very exciting
copper anomalies, and we will be looking at getting an extensive copper
exploration programme going in parallel to the work on the iron Project.
Previous work undertaken by, amongst others, Mesars Universal Ores (Pty) Ltd,
Kaniganas Mining Company (Carbonado Investments (Pty) Ltd), Newmont South
Africa Limited and Falconbridge of South West Africa (F.S.W.A), and ActLabs,
will assist the company in focusing its near term development programme.
"We look forward to working with TNMM to bring this Project to fruition and
will provide further market updates shortly to keep shareholders reasonably
informed of our progress."
FURTHER INFORMATION
The JV Agreement ('Agreement')
Under the terms of the Agreement, Katoro is required to procure financing for
the full funding requirements of the Project and JV, including the
construction and commissioning of a beneficiation plant and auxiliary
operations should the continued development and exploration work provide
positive results. The Agreement has a stated objectives for the JV to target
production capacity of 3Mtpa once all development work is completed.
Pursuant to the Agreement, once the only remaining conditions have been met,
being the approval of a work programme and associated budget to advance the
Project to bankability status, the JV Partners will form the JV, which is
intended to be an unincorporated JV to be held 50% by the Company and 50% by
TNMM.
Under the Agreement, TNMM shall make available to the JV, all technical data
relating to the TNMM Properties and TNMM Rights, including but not limited to,
all geological data, feasibility studies, geophysical and geochemical data in
its possession. TNMM will furthermore provide the JV with customary warranties
and undertakings in respect of ownership of the TNMM Properties and TNMM
Rights.
It is proposed that the JV will continue for an indefinite period for as long
as Katoro is in compliance with its obligations in accordance with the
Agreement, including sourcing funding for the development of the Project,
which, if positive, leading to the mining, processing, beneficiating and
selling of concentrates of iron ore and any other minerals that may be
processable in economically viable quantities.
The JV Partners will establish a Management Committee to oversee the
objectives of the JV, including the consideration and approval of the work
programme and budget, the determination of the admissibility of expenditure
and the appointment of auditors to the JV. The Management Committee will
furthermore establish Technical Subcommittees to advise and review the
technical aspects of the JV. Katoro and TNMM shall appoint two representatives
to the Management Committee, respectively, with Katoro appointing the chairman
of the Management Committee who must be a member of same. Subject to Katoro
having procured the full funding requirements for the JV, the Company will be
entitled to appoint three members to the Management Committee.
The right to net revenue earned from all concentrates of iron ore and any
other mineral mined or acquired by the JV is to vest in accordance with each
party's interest in the JV.
Under the Agreement, Katoro has a pre-emptive right to acquire up to 60% of
the total issued share capital of TNMM and the same percentage of all claims
on the shareholder loan account against TNMM should the TNMM shareholders
decide to sell its interest in TNMM. If the right is exercised, the purchase
price may be elected to be payable by cash or new Katoro shares.
The Agreement contains assignment rights of the whole or any part of a party's
rights and obligations to an affiliate, subject to such affiliate covenanting
to be bound by the terms and conditions of the Agreement. The Agreement also
contains termination rights including: (i) if the consequences of
expropriation materially affect the economic feasibility of the JV; (ii) in
the event that the mining or processing activities conducted by the JV should
prove, to the satisfaction of both parties, that further exploration or mining
would not be commercially viable; or (iii) at any time by mutual agreement. In
addition, the JV shall terminate 90 days after the manager of the JV delivers
to each party a written notice stating that all viable deposits of iron ore
and/or any other minerals to which the TNMM Properties relate have been
exhausted.
IMPORTANT INFORMATION FOR SHAREHOLDERS
Katoro shareholders should note that there is no certainty that the Project
funding, which includes all funding that is required to advance the project to
industry bankability standards, and to construct and commission the Project,
will be secured for the continued development of the Project, and if the
Project progresses, the construction and commissioning of a plant to produce a
marketable iron ore product or any other minerals or derivatives thereof. If
the Project funding is not secured, the conditions of the Agreement will not
have been satisfied and the Project will not commence, meaning that the
Company will have no further interest in the JV or the Project.
Review by Qualified Persons
Information in this announcement that relates to the Naruchas Mineral Resource
is taken from the report titled 'Mineral Resource and Ore Reserve Statement'
compiled by Miss Sheron Kaviua for Trans-Namibian Mining and Minerals (Pty)
Ltd and dated 31 October 2013 (the 'Report'). The Report contains a
SAMREC-compliant Mineral Resource estimate, based on the SAMREC CODE, 2007
Edition. The Competent Person responsible for the submission of this document,
Miss Sheron Kaviua, was registered with the Geological Society of South Africa
and was a Competent Person in resource evaluation of base metals based on the
criteria set out in the SAMREC CODE at the date of the report at which point
she had seven years' experience in resource estimation and three years'
experience in resource statement compilation. Specifically, she had four
years' experience relevant to the style of mineralisation and type of deposit
at Naruchas, where she was involved in exploration in the period 2010 to 2013
and conducted several sampling and mapping programmes on the property as an
independent consultant.
Information contained in this announcement has also been reviewed by Mr.
Noel O'Keeffe, geologist, BSC. P.Geo, who is a Member of the Institute of
Geologists of Ireland. Mr. O'Keeffe has several years' experience in the
management and evaluation of mineral exploration projects.
Further announcements in respect of the JV will be made as appropriate.
Glossary of Technical Terms
BCM(S) Bench CubicMetre (s) means a measure of volume of one cubic meter for
excavation and payment purposes and is intended to be the volume of the
original rock in situ prior to blasting and excavation, as determined by using
generally accepted survey methods.
Cut-off grade The cut-off grade is the level below which material within an ore body does
not contain sufficient value to economically justify processing into a final
saleable form.
Diamictite A poorly sorted or non-sorted terrigenous non-calcareous sedimentary rock that
contains variously sized clasts from clay to boulders in a muddy matrix.
Density Measure of the relative "heaviness" of objects in terms of constant volume.
Density = -mass/volume.
Fe The percentage of the chemical element 'Iron'.
Fe(2)O(3)% The percentage of the mineral 'Haematite', which is often the principal ore
mineral of economic interest containing iron in Iron ore deposits.
grade The concentration of the desired/target metal or other mineral material.
IDW2 Inverse distance weighting squared. An interpolation technique where the
influence of a data point is reduced in proportion to the square of the
distance between it and the unknown point being estimated.
Indicated Mineral Resource That part of a mineral resource for which tonnage, densities, shape, physical
characteristics, grade and quality can be estimated with a moderate level of
confidence. Based on exploration, sampling and testing information gathered
through appropriate techniques from locations such as outcrops, trenches,
pits, workings and drill-holes. The data-point locations are appropriate to
confirm physical continuity, while they are too widely or inappropriately
spaced to confirm quality continuity. However, such locations are spaced
closely enough for quality continuity to be assumed.
Inferred Mineral Resource That part of a mineral resource for which tonnage, grade and quality can be
estimated with a low level of confidence. It is inferred from geological
evidence and assumed but not verified physical continuity with or without iron
quality continuity. Based on exploration, sampling and testing information
gathered through appropriate techniques from locations such as outcrops,
trenches, pits, workings and drill-holes which is limited or of uncertain
quality or reliability.
In Situ Ore Ore (a naturally occurring mineral containing a valuable constituent (such as
metal) for which it is mined and worked) that is in its raw state in the
ground.
m A metre - a measure of length or thickness.
Measured Mineral Resource A Measured Mineral Resource is that part of a Mineral Resource for which
quantity, grade or quality, densities, shape and physical characteristics are
estimated with confidence sufficient to allow the application of Modifying
Factors to support detailed mine planning and final evaluation of the economic
viability of the deposit.
Mineral Resource A 'Mineral Resource' is a concentration or occurrence of diamonds, natural
solid inorganic material or natural solid fossilised organic material,
including base and precious metals, coal and industrial minerals, in or on the
Earth's crust in such form and quantity and of such a grade or quality that it
has reasonable prospects for economic extraction. The location, quantity,
grade, geological characteristics and continuity of a Mineral Resource are
known, estimated or interpreted from specific geological evidence and
knowledge.
Mt Abbreviation for megaton (a measure of weight). Equals 1 million tonnes.
Probable Mineral Reserve A 'Probable Mineral Reserve' is the economically mineable material derived
from a Measured or Indicated Mineral Resource or both. It is estimated with a
lower level of confidence than a Proved Mineral Reserve. It includes diluting
and contaminating materials and allows for losses that are expected to occur
when the material is mined. Appropriate assessments to a minimum of a
Pre-Feasibility Study for a project or a Life of Mine Plan for an operation
must have been carried out, including consideration of, and modification by,
realistically assumed mining, metallurgical, economic, marketing, legal,
environmental, social and governmental factors. Such modifying factors must be
disclosed (SAMREC definition).
Proved Mineral Reserve A 'Proved Mineral Reserve' is the economically mineable material derived from
a Measured Mineral Resource. It is estimated with a high level of confidence.
It includes diluting and contaminating materials and allows for losses that
are expected to occur when the material is mined. Appropriate assessments to a
minimum of a Pre-Feasibility Study for a project or a Life of Mine Plan for an
operation must have been carried out, including consideration of, and
modification by, realistically assumed mining, metallurgical, economic,
marketing, legal, environmental, social and governmental factors. Such
modifying factors must be disclosed (SAMREC definition).
Reverse Circulation Drilling A method of drilling using inner and outer drill tubes where a pulverised
sample of rock is returned to the surface by pneumatic pressure.
Run of Mine The raw unprocessed or uncrushed Ore in its natural state obtained after
blasting or digging from the mineralised zone.
SAMREC South African Code for Reporting Exploration Results, Mineral Resources and
Ore Reserves
Stripping Ratio The amount of waste (or overburden) that must be removed to release a given
Ore quantity.
Historical Estimate Under the SAMREC Code, an estimate of the quantity, grade, or metal or mineral
content of a deposit that an issuer has not verified as a current Mineral
Resource or Mineral Reserve. The estimate predates the issuing of the Code
and/or was prepared before the issuer acquired, or entered into an agreement
to acquire, an interest in the property that contains the deposit.
This announcement contains inside information as stipulated under the Market
Abuse Regulations (EU) no. 596/2014.
**ENDS**
For further information please visit www.katorogold.com
(http://www.katorogold.com) or contact:
Louis Coetzee louisc@katorogold.com (mailto:louisc@katorogold.com) Katoro Gold plc Executive Chairman
Bhavesh Patel / Stephen Allen +44 20 3440 6800 RFC Ambrian Ltd Nominated Advisor
Nick Emmerson +44 (0) 1483 413 500 SI Capital Ltd Broker
Sam Lomanto
Zainab Slemang van Rijmenant zainab@lifacommunications.com (mailto:zainab@lifacommunications.com) Lifa Communications Investor and Media Relations Consultant
This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact
rns@lseg.com (mailto:rns@lseg.com)
or visit
www.rns.com (http://www.rns.com/)
.
RNS may use your IP address to confirm compliance with the terms and conditions, to analyse how you engage with the information contained in this communication, and to share such analysis on an anonymised basis with others as part of our commercial services. For further information about how RNS and the London Stock Exchange use the personal data you provide us, please see our
Privacy Policy (https://www.lseg.com/privacy-and-cookie-policy)
. END JVEUKOBRUNUKAAR