REG - Thor Mining PLC - DRILLING COMPLETION & PRELIMINARY OBSERVATIONS <Origin Href="QuoteRef">THRL.L</Origin>

Thor EnergyAnnouncement

15/03/2017 11:20

RNS Number : 5527Z
Thor Mining PLC
15 March 2017
15 March 2017
THOR MINING PLC
DRILLING COMPLETION & PRELIMINARY OBSERVATIONS
PILOT MOUNTAIN - NEVADA
The Board of Thor Mining Plc ("Thor" or the "Company") (AIM, ASX: THR), is pleased to advise the successful completion of the first round of drilling at the Company's wholly owned Pilot Mountain tungsten project in Nevada, USA.
Highlights:
 51 metres of scheelite bearing skarn including 9 metres with visible sulphide mineralisation (including chalcopyrite) intersected 25 metres to the east and approximately 50 metres closer to surface from high grade Desert Scheelite intersection from the 2012 high grade intersection at DSDD015 (17.5m @ 5.7% Cu equivalent);
 Third hole at Desert Scheelite intersected 15 metres of mineralised skarn from 124.7m (down hole length), aligning with results from the 2012 drill program;
 Six holes completed at Garnet with better than expected results including 19.0 metres(m) from 75.5m in 17GR-RC05 not previously recorded;
 Confirmation of metal grades within the reported mineralised skarn intersections will be determined via laboratory assays and announced within four weeks;
Mr Mick Billing, Executive Chairman of Thor: "Subject to the receipt of assays, the Pilot Mountain drilling program has substantially exceeded expectations. The third Desert Scheelite drill hole has demonstrated continuation of mineralisation for a total of 50 metres to the east of DSDD015, drilled in 2012. The 15 metres of mineralised skarn from the third hole is consistent with our expectations and highlights the strong potential for continued extension of Desert Scheelite to the east and at depth. Planning for a follow up drill program at Desert Scheelite has commenced."
"The Garnet prospect drilling has shown remarkable consistency with the historic data which bodes well for a near term maiden resource for the deposit. The unexpected additional scheelite mineralisation discovered in Hole 17GR-RC05 at the Garnet prospect asserts the robust potential of this project".
The Desert Scheelite deposit currently comprises 100% of the Pilot Mountain Resource estimate of 6.7Mt. The objective of the two holes programmed at this deposit is to test for extensions to the high grade mineralisation intersected in the last hole drilled into this deposit in 2012.
The first of these (Hole 1) was designed to test for mineralisation 100 metres vertically above DSDD15. This hole failed to intersect mineralisation due to what appears to be fault displacement.
Hole 2 targeted mineralisation 75 metres above and 25 metres to the east of DSDD15 and intersected 51 metres of visible scheelite mineralisation from 142 metres down hole including 9 metres of higher sulphide style mineralisation, including visible chalcopyrite from 172 metres down hole. While this very encouraging drill intersection appears to be comparable with the intersection of DSDD15, assay results are required to confirm actual metal content.
Hole 3 targeted mineralisation a further 25 metres to the east of the second hole and intersected 15 metres of mineralised skarn from 124.7m, which is in line with the results from the 2012 drilling programme.
Table 1: Pilot Mountain Resource Summary 2014 (JORC 2012, announced 10 June 2014. 100% owned by Thor Mining Plc
Desert Scheelite
Resource
WO3
Ag
Cu
Tonnes
Grade %
Contained metal (t)
Grade g/t
Contained metal (t)
Grade %
Contained metal (t)
Indicated
6,090,000
0.31
18,900
24.2
150
0.16
10,000
Inferred
700,000
0.30
2,100
9.1
10
0.24
2,000
Total
6,790,000
0.31
21,000
22.8
160
0.17
12,000
The Company confirms that, until assay results are available for the current drilling program, it is not aware of any new information or data that materially affects the information included in the above table, and, that all material assumptions and technical parameters underpinning these estimates continue to apply and have not materially changed.
Intersections quoted in this announcement, and also for previous drilling results for DSDD15, are down-hole measurements only, as at this stage there is insufficient data to adequately assess true width of mineralisation. The quantity of data available is generally not sufficient to allow any reasonable estimates of Mineral Resources in accordance with the JORC code. We anticipate being in a position to update the Mineral Resource estimate following the receipt of assay results expected in approximately four weeks.
Table 2: Desert Scheelite Drill hole orientation summary
Hole Id
Alias
Easting
NAD83 zone 11
Northing
NAD83 zone 11
Hole collar dip*
Hole collar
Azimuth*
Final Depth
(m)
17DS-RC01
Hole 1
424 458
4 248 320
-60
179
142
17DS-RC02
Hole 2
424 460
4 248 320
-75
150
210
17DS-RC03
Hole 3
42 4604
4 248 319
-58
137
152
* Down hole surveys of these holes have shown dip and azimuth variation to be less than 5 degrees.
Table 3: Summary of Garnet drill hole observations 2017 in comparison with historic drill data from Union Carbide Corp drilling conducted in the 1970's.
Hole ID
(2017)
Easting
(NAD83
zone 11)
Northing
(NAD83
zone 11)
Elevation
(m ASL)
Intersection
(Thor 2017)
Historic Intersection
(UCC 1970's)
17GR-RC01
422,442 
4,249,532 
2135
6.9 - 9.1m (2.2m)
GR-66
3.0 - 7.0m (4m)
36.6 - 37.3m (0.7m)
Not previously recorded
41.2 - 48.8m (7.6m)
40.2 - 48.2m (8m)
83.1 - 88.4m (5.3m)
83.5 - 88.6m (5.1m)
17GR-RC02
422,526 
4,249,694 
2136
28.2 - 28.9m (0.7m)
GR-119
29.8 - 37.9m (8.1m)
32.8 - 36.6m (3.8m)
17GR-RC03
422,489 
4,249,756 
2130
13.7 - 19.0m (5.3m)
GR-128
15.2 - 19.8 (4.6m)
Not intersected
26.5 - 29.3m (2.8m)
Not intersected
37.5 - 40.0m (2.5m)
43.4 - 48.8m (5.4m)
Not previously recorded
17GR-RC04
422,357 
4,249,532 
2163
19.0 - 24.4m (5.4m)
GR-123
14.0 - 18.5m (4.5m)
73.6 - 75.5m (1.9m)
Not previously recorded
17GR-RC05
422,354 
4,249,754 
2158
6.9 - 9.9m (3.0m)
GR-98
Not previously recorded
13.7 - 18.3m (4.6m)
15.9 - 18.6m (2.7m)
Not intersected
22.6 - 24.1m (1.5m)
51.1 - 52.1m (1.0m)
Not previously recorded
75.5 - 94.5m (19.0m)
Not previously recorded
17GR-RC06
422,377 
4,249,783 
2158
2.2 - 3.8m (1.6m)
GR-100
Not previously recorded
7.2 - 12.2m (5.0m)
7.1 - 9.3m (2.2m)
14.5 - 22.1m (7.6m)
15.1 - 19.7m (4.6m)
25.8 - 35.8m (9.9m)
25.9 - 35.4m (9.5m)
42.4 - 45.0m (1.2m)
Not previously recorded
Note: All holes were drilled vertical and surveyed by north seeking gyroscopic down hole tool;
Enquiries:
Mick Billing
+61 (8) 7324 1935
Thor Mining PLC
ExecutiveChairman
Ray Ridge
+61 (8) 7324 1935
Thor Mining PLC
CFO/Company
Secretary
Colin Aaronson/
Daniel Bush/
Richard Tonthat
+44 (0) 207 383 5100
Grant Thornton UK LLP
Nominated Adviser
Elliot Hance
+44 (0) 207382 8300
Beaufort Securities Limited
Joint Broker
Nick Emerson / Andy Thacker
+44 (0) 1483 413 500
SI Capital Ltd
Joint Broker
Tim Blythe/ Camilla Horsfall
+44 (0) 207 138 3222
Blytheweigh
Financial PR
Updates on the Company's activities are regularly posted on Thor's website www.thormining.com, which includes a facility to register to receive these updates by email, and on the Company's twitter page @ThorMining.
The information contained within this announcement is deemed to constitute inside information as stipulated under the Market Abuse Regulations (EU) No. 596/2014. Upon the publication of this announcement, this inside information is now considered to be in the public domain.
Competent Person's Report
The information in this report that relates to exploration results and exploration targets is based on information compiled by Richard Bradey, who holds a BSc in applied geology and an MSc in natural resource management and who is a Member of The Australasian Institute of Mining and Metallurgy. Mr Bradey is an employee of Thor Mining PLC. He has sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the 'Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves'. Richard Bradey consents to the inclusion in the report of the matters based on his information in the form and context in which it appears.
About Pilot Mountain
Thor's Pilot Mountain Project, acquired in 2014, is located approximately 200 kilometres south of the city of Reno and 20 kilometres east of the town of Mina located on US Highway 95.
The Pilot Mountain Project comprises four tungsten deposits: Desert Scheelite, Gunmetal, Garnet and Good Hope. All are in close proximity (~three kilometres) to each other and have been subjected to small-scale mining activities at various times during the 20th century. Union Carbide acquired the project in 1978, for US$7.0 million (estimated at US$26million - US$40million in 2017 dollars), and conducted detailed exploration and feasibility activities until, following a global downturn in the tungsten industry in the 1980s, they suspended further work.

This information is provided by RNS
The company news service from the London Stock Exchange
  END
DRLUVAARBOAOAAR