REG - Empire Metals Ltd - Diamond Drilling to Commence at Pitfield Project

Empire MetalsAnnouncement

10/09/2024 07:00

For best results when printing this announcement, please click on link below:
http://newsfile.refinitiv.com/getnewsfile/v1/story?guid=urn:newsml:reuters.com:20240910:nRSJ4722Da&default-theme=true

RNS Number : 4722D  Empire Metals Limited  10 September 2024

Empire Metals Limited / LON: EEE / Sector: Natural Resources

 

10 September 2024

Empire Metals Limited

('Empire' or the 'Company')

 

Diamond Drilling to Commence at Pitfield:

Focused on High-Purity Anatase Deposit Within Near Surface Weathered Zone

 

Empire Metals Limited (LON: EEE), the AIM-quoted resource exploration and
development company, is pleased to announce the commencement of the next major
exploration campaign at the Thomas and Cosgrove prospects within the Pitfield
Project in Western Australia ('Pitfield' or the 'Project'), with 1,000m of
Diamond Core drilling planned to be completed in October. The focus of the
drill campaign will be on providing a better geological understanding of the
weathered cap zone, including thickness, grade and shape, as well as obtaining
additional drill core samples for metallurgical test work.

 

Highlights

 

·    The thickness and TiO(2) grade of the near-surface, weathered
sandstone-hosted, high-purity anatase deposit will have significant positive
implications for the economics of the Project.

 

·    Core logging, analysis of geochemistry and mineralogical studies of
drill core from previous drilling campaigns have provided a good understanding
of the local weathering profile, and how weathering has affected TiO(2) grade
and ore/gangue mineralogy, all of which have been used in determining the
location of the proposed new diamond core drillholes.

 

·    Geological modelling has already identified a "saprolite" cap of
weathered sandstones hosting high-grade TiO(2) mineralisation to a depth of
76m at the Thomas prospect.  The planned diamond drilling will further map
out the thickness, grade, shape and extent of this mineralised saprolite cap.

 

·    The diamond core recovered from this next round of drilling will also
be used to provide additional substantial quantities of high-grade,
high-purity anatase-rich ore to accelerate the mineral processing test work
that recently commenced on the weathered cap samples (announced 4 September
2024).

 

·    Project development team expanded with the appointment of an
experienced resource and exploration geologist, with degrees in Geology,
Metallurgy and Computer Science, who will assist with the exploration drilling
and help build both the geometallurgical and mineral resource estimate models.

 

 

Shaun Bunn, Managing Director, said: "I am pleased to announce the
commencement of the next round of diamond core drilling, which is concentrated
within two centrally located, high-grade target areas, previously identified
as the Thomas and Cosgrove prospects. Importantly, this drill campaign is
focused on proving up the extent, grade and shape of the concentrated zone of
high-purity anatase within the extensive weathered cap and providing further
metallurgical samples which is of particular importance to our ongoing,
project development plans.

 

"Furthermore, I am delighted to announce that Mr Tsog Batsaikhan has joined
the Company as our Senior Geologist, and he will initially be working
alongside our Exploration Manager, Andrew Faragher, assisting with the
supervision of the drill programme. Tsog is a highly experienced and talented
geologist with over 15 years' experience across exploration, mining and
resource geology. Importantly, Tsog has recently completed a master's degree
in Metallurgy from the Western Australia School of Mines and his understanding
of resource geology and geometallurgy will have a real and immediate impact on
the Pitfield project given the current transition from the exploration phase
into process flowsheet development."

 

 

Drilling Programme

 

The Company recently announced that a high-grade, high-purity anatase deposit
had been identified within the near-surface "saprolite" cap of strongly
weathered sandstone bedrock that transitions downward into a high-grade,
titanite-rich deposit within the fresh sandstone bedrock found below this
weathered cap (RNS: 22 August 2024). Results from the last two drill
programmes have highlighted the extent of this weathered cap that hosts the
anatase deposit, especially at the Cosgrove and Thomas prospects where the
Company has established a JORC Exploration Target (RNS: 12 June 2024). The
thickness and TiO(2) grade of this anatase deposit will have significant
implications for the economics of the Project. Mineralogical studies,
combining X-Ray Diffraction (XRD), TESCAN Integrated Mineral Analyzer (TIMA)
 and scanning electron microprobe (SEM) data highlighted high-purity anatase
as the dominant titanium mineral within the weathered cap, potentially
offering a simpler processing route for this weathered or secondary ore type,
than that expected for the unweathered or primary titanite-rich ore type.
Mapping the thickness, grade, shape and extent of the weathered cap, and
providing substantial quantities of high-grade anatase ore for mineral
processing test work are two of the key objectives of the current drilling
campaign.

 

The planned programme involves drilling five, larger diameter 'PQ-size'
diamond drillholes at both the Thomas and Cosgrove prospects, aimed at
sampling the complete weathering profile in each hole, including the deeper,
higher-grade parts of the weathering cap. All holes are planned for a downhole
depth of 100m to ensure the weathered zone is adequately captured along with
the transition from partially weathered into fresh bedrock. Holes will be
drilled at an angle of 60° and an azimuth of 240° to account for the
330-340° strike of the rocks. The programme is expected to take up to four
weeks to completed drilling.  Core sampling and assay results will then
follow.

 

The drillholes have been planned based on the previous Reverse Circulation
("RC") and diamond drilling results. Core logging, analysis of geochemistry
and mineralogical studies of drill core from previous drill campaigns have
provided a good understanding of the weathering profile, and how weathering
has affected the TiO(2) grade and the ore/gangue mineralogy, all of which have
been used in determining the location of the proposed new holes.

 

Logging of the previous diamond holes clearly shows that the anatase-rich ore
zone transitions downwards from surface through strongly weathered saprolitic
sandstones to partially weathered sandstones, and ultimately fresh sandstones
where the anatase has transitioned to titanite as the dominant titanium ore
mineral.  The strongly weathered saprolite zone has significantly more
kaolinite and less carbonate, chlorite, and epidote. As the hole transitions
from weathered sandstone bedrock above to fresh sandstone bedrock below the
mineralogy changes, with increases in carbonate, chlorite and epidote and much
less kaolinite.

 

Mineralogical XRD data from one of the RC drillholes (RC23COS019) show
depletion of albite and chlorite and addition of kaolinite and quartz in the
strongly weathered saprolite zone, corroborating the logging data. The XRD
data also highlight anatase as the dominant titanium ore mineral in the
weathered zone with titanite increasing downwards as the host sandstones
transition from weathered to fresh.

 

Geochemical data also shows depletion in Ca(+2), Mg(+2) and Na(+) ions from
host sandstones within the weathered zone. Depletion in Ca(+2) is due to the
dissolution of carbonate from the host rocks, leaving small cavities, and the
weathering of titanite (CaTiSiO(5)) to anatase (TiO(2)). The loss of Mg(+2)
and Na(+) is primarily from the weathering of chlorite and albite
respectively, two common gangue minerals found in the unweathered host
sandstones. Using these elements as pathfinders has provided an excellent
proxy for the depth of weathering, corroborated with diamond core logging.

 

The geochemical mapping of the Thomas and Cosgrove prospects has aided the
optimal location of next phase drill targets that will further define the
 geology, structure, shape and grade distribution of the near-surface anatase
deposit, all required for consequent mineral resource estimation, as well as
providing the opportunity to collect representative metallurgical samples in
the form of larger diameter PQ diamond drill core.

 

Thomas Prospect

The geochemical analysis of the geological model prepared for the Thomas
prospect shows that the depth of weathering varies from 22m to 76m from
surface, with the central core of the prospect averaging a significant 54m
below surface.  The grades within these weathered zones vary between 5.0% to
7.4% TiO(2), with the central core averaging 6.25% TiO(2). The central core
has been selected as the proposed site for four of the diamond drillholes, two
of these holes (PH#4_DD_TOM_MET003 and 006) are situated between RC holes
RC24TOM021 and RC24TOM022 which are drilled 600m apart along strike (refer
Figures 1 and 2). Logging of these two RC drillholes showed weathering to 74m
and 54m respectively and the grade within the weathered zones averaged 6.8%
and 7.0% TiO(2), respectively.

 

An additional two diamond drillholes (PH#4_DD_TOM_MET004 and 007) are planned
600m to the east of the first four drillholes, located between RC drillholes
RC24TOM019 and RC24TOM023 which are weathered to 38m and 58m depths below
surface and grade 6.0% and 5.5% TiO(2), respectively. These diamond drillholes
have been designed to test the width extent of the high-grade anatase
mineralisation within the central core of the Thomas prospect.

 

The final diamond drillhole (PH#4_DD_TOM_MET001) is located between RC23TOM002
and RC23TOM003, which were originally drilled to test the up-dip extension of
the high-grade bedrock mineralisation previously identified in one of the
initial diamond drillholes (DD23TOM001) completed in November 2023.  These
two RC drillholes are weathered to 48m and 36m and grade 7.4% and 6.8% TiO(2),
respectively. The proposed diamond drill hole will test the strike extent of
the high-grade zone in DD23RCTOM002 represented as a deep magnetic low within
the magnetics data.

 

Figure 1: Location of planned diamond drillholes and depth of weathering of
existing holes at the Thomas Prospect.

Note, two additional diamond drillholes have been located (labelled Priority 2
in Figure 1) to allow flexibility in the programme in case of access issues
due to ground conditions, however it is not intended to drill either of these
at this particular stage.

Figure 2: Location of planned diamond drillholes and grade of TIO(2)
mineralisation in weathered zone in existing holes at the Thomas Prospect.

 

Cosgrove Prospect

The geochemical analysis of the geological model prepared for the Cosgrove
prospect indicates  more variable weathering depths than at Thomas, with
weathering only as deep as 8m in some parts. The deepest weathering identified
so far extends down 58m from surface and the average depth of weathering is
34m.  It is important to note that the depth of weathering is partly
dependent on the position of the drill hole in relation to the topography.
Drillholes lower down the slope show shallower depths of weathering than those
closer to, or on the top of higher ground.  Similar to the Thomas prospect,
the grades within the weathering zone are also variable, ranging from 4.0% to
7.2% TiO(2).

 

The planned diamond drillholes are focussed in two areas where there is a
deeper zone of weathering and higher grade TiO(2) mineralisation (refer
Figures 3 and 4). Holes PH#4_DD_COS_MET001 and 002 are designed to test
between holes RC24COS016, 017 and 018 which were weathered to 40m, 30m and 32m
respectively with grades of 6.8%, 6.5% and 6.8% TiO(2) respectively. These
diamond drillholes are located towards the northern end of the Cosgrove
prospect where previous rock chip samples returned grades >15% TiO(2),
distinguishing this surface area as one of the more enriched zones at
Pitfield.

 

Planned holes PH#4_DD_COS_MET002 and 003 are located within the central zone
at Cosgrove where there is higher ground. These diamond drillholes are
designed to test the higher grade weathering profile associated with RC
drillholes RC23COS019 and DD23COS001.  These RC drillholes intercepted
weathered vertical depths of 36m and 34m, with grades of 7.2% and 5.9% TiO(2),
respectively.

Figure 3: Location of planned diamond drillholes and depth of weathering of
existing holes at the Cosgrove Prospect.

Figure 4: Location of planned diamond drillholes and grade of TiO(2) of
existing holes at the Cosgrove Prospect.

As per the proposed Thomas prospect drilling, two additional diamond
drillholes (labelled as Priority 2 in Figure 2) have been planned and located
as alternatives given that access to that part of the Cosgrove prospect is
still wet due to recent rains.

 

Exploration Team Recently Expanded

Tsog Batsaikhan has joined the Company as Senior Geologist, and will initially
be working alongside the Exploration Manager, assisting with the supervision
of the drilling contractor and the logging of the diamond drill core. Tsog has
over 15 years of international experience as a geologist, working across all
aspects of the mining industry including exploration, open-pit and underground
mining, and resource definition and geological modelling.

 

Tsog has recently completed a master's degree in Metallurgy from the Western
Australia School of Mines and his understanding of the relationships between
the gangue minerals and the titanium ore minerals found at Pitfield, both
within the weathered zone and the fresh bedrock, will be key to a successful
project outcome. The development of a geometallurgical model will be critical
to the optimisation of other important aspects of development work such as
process design and mineral resource definition.

 

Acceleration of Metallurgical Testwork Programme

Testwork conducted to date has been on the fresh bedrock titanite ore, however
the discovery of concentrated, high-purity anatase in the overlying weathered
bedrock cap has significant positive implications for the economics of the
Project, necessitating a shift in the testwork focus. The diamond core
recovered from this next round of drilling will be used to provide additional,
substantial quantities of high-grade, high-purity anatase-rich ore to
accelerate the mineral processing test work that has already commenced on the
weathered cap samples (announced 4 September 2024).

 

Diamond core samples collected from the drill campaign carried out through
February and March 2024 have been composited and submitted to the laboratory
for crushing/grinding ahead of mineral concentration testwork. These samples
will undergo initial gravity separation testing over the coming weeks.

 

In the meantime, as announced on 4 September, the Company's overall
mineralogical and metallurgical testwork programme has been expanded, engaging
international and locally based expert consultants, and utilising Australian
based government and commercially owned laboratory facilities. A wide range of
high-potential mineral processing and hydrometallurgical techniques are under
consideration and multiple studies have commenced looking at ore
characterisation, comminution, gravity and magnetic separation, flotation,
leaching and product finishing.

 

The Pitfield Project

Located within the Mid-West region of Western Australia, near the northern
wheatbelt town of Three Springs, Pitfield lies 313km north of Perth and 156km
south of Geraldton, the Mid West region's capital and major port. Western
Australia is ranked as one of the top mining jurisdictions in the world
according to the Fraser Institute's Investment Attractiveness Index published
in 2023, and has mining-friendly policies, stable government, transparency,
and advanced technology expertise. Pitfield has existing connections to port
(both road & rail), HV power substations, and is nearby to natural gas
pipelines as well as a green energy hydrogen fuel hub, which is under planning
and development (refer Figure 5).

Figure 5. Pitfield Project Location showing the Mid-West Region Infrastructure
and Services.

Since commencing its maiden drill campaign in March 2023, the Company has
completed a total of 107 drillholes for 17,003m (including seven diamond core
holes for 2,025m), of which 67 RC drillholes and six diamond core drillholes
were drilled within the Cosgrove and Thomas prospects (Figure 6). The drilling
shows a high-grade (>5% TiO(2)), more than 1km wide central core running on
a north-south trend through both mineral prospects, which could join between
the two prospects thereby representing a potential total strike length of more
than 20km. Significantly, the RC drillhole results clearly indicate elevated
TiO(2) grades are present within the top 40m (RNS: 15 May 2024).

Figure 6.  Grey-scale magnetics map overlain by airborne gravity survey
results with the location of RC and Diamond Core drillholes and the Cosgrove
and Thomas Exploration Target.

 

Competent Person Statement

The technical information in this report that relates to the Pitfield Project
has been compiled by Mr Andrew Faragher, an employee of Eclipse Exploration
Pty Ltd, a wholly owned subsidiary of Empire. Mr Faragher is a Member of the
Australian Institute of Mining and Metallurgy. Mr Faragher has sufficient
experience that is relevant to the style of mineralisation and type of deposit
under consideration and to the activity being undertaken to qualify as a
Competent Person as defined in the 2012 Edition of the 'Australasian Code for
Reporting of Exploration Results, Mineral Resources and Ore Reserves'. Mr
Faragher consents to the inclusion in this release of the matters based on his
information in the form and context in which it appears.

 

Market Abuse Regulation (MAR) Disclosure

Certain information contained in this announcement would have been deemed
inside information for the purposes of Article 7 of Regulation (EU) No
596/2014, as incorporated into UK law by the European Union (Withdrawal) Act
2018, until the release of this announcement.

 

**ENDS**

 

For further information please visit www.empiremetals.co.uk
(http://www.empiremetals.co.uk)   or contact:

 Empire Metals Ltd

 Shaun Bunn / Greg Kuenzel / Arabella Burwell                                            Tel: 020 4583 1440
 S. P. Angel Corporate Finance LLP (Nomad & Broker)                                      Tel: 020 3470 0470

 Ewan Leggat / Adam Cowl
 Shard Capital Partners LLP (Joint Broker)                                               Tel: 020 7186 9950

 Damon Heath
 St Brides Partners Ltd (Financial                                                       Tel: 020 7236 1177
 PR)

 Susie Geliher / Charlotte Page

 

About Empire Metals Limited

Empire Metals is an AIM-listed exploration and resource development company
(LON: EEE) with a primary focus on developing Pitfield, an emerging giant
titanium project in Western Australia.

 

Exploration activity at Pitfield has confirmed the discovery of a new giant
mineralised system extending over 40km by 8km by 5km deep. Drilling campaigns
have confirmed high-grade TiO₂ mineralised zones across thick bedded
intervals to a vertical depth of ~350m, confirming Pitfield as a world class,
district-scale titanium mineral system.

 

Empire is now accelerating the economic development of Pitfield, with the
objective of becoming a leading producer of high value titanium dioxide
products.

 

The Company also has two further exploration projects in Australia; the
Eclipse Project and the Walton Project in Western Australia, in addition to
three precious metals projects located in a historically high-grade gold
producing region of Austria.

 

 

This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact
rns@lseg.com (mailto:rns@lseg.com)
 or visit
www.rns.com (http://www.rns.com/)
.

RNS may use your IP address to confirm compliance with the terms and conditions, to analyse how you engage with the information contained in this communication, and to share such analysis on an anonymised basis with others as part of our commercial services. For further information about how RNS and the London Stock Exchange use the personal data you provide us, please see our
Privacy Policy (https://www.lseg.com/privacy-and-cookie-policy)
.   END  DRLBXGDCDUGDGSC