REG - Empire Metals Ltd - Significant Progress Achieved on Process Flowsheet

Empire MetalsAnnouncement

13/02/2025 07:00

For best results when printing this announcement, please click on link below:
https://newsfile.refinitiv.com/getnewsfile/v1/story?guid=urn:newsml:reuters.com:20250213:nRSM8913Wa&default-theme=true

RNS Number : 8913W  Empire Metals Limited  13 February 2025

Empire Metals Limited / LON: EEE / Sector: Natural Resources

13 February 2025

Empire Metals Limited

("Empire" or "the Company")

 

Significant Progress Achieved on Process Flowsheet

Focus now on Product Development

 

Empire Metals Limited (LON: EEE), the AIM-listed resource exploration and
development company, is pleased to announce the results from its recent
mineral separation and hydrometallurgical testwork programme, carried out on
core samples taken from the weathered cap that extends across the Pitfield
Project ('Pitfield'), located in Western Australia.

 

Highlights

 

·    Development of the processing flowsheet continues at a rapid pace
with several of the initial process stages now tested and proven to be
effective for recovering anatase and rutile, the most abundant titanium
minerals encountered in the mineralised weathered cap.

 

·  The test work results achieved to date indicate that a combination of
gravity and flotation techniques offers a straightforward processing method to
produce a clean, anatase-rich concentrate, which can be further upgraded via
acid leaching to yield high-grade, high-purity TiO₂.

 

·    The weathered cap, extending from surface to over 50m deep, is highly
friable and amenable to low-cost scrubbing and desliming to remove fines
before applying simple gravity recovery on the coarser fraction to produce a
titanium mineral concentrate.

 

·    Titanium dioxide mineral separation and concentration was achieved on
the finer fraction of the deslimed weathered samples, utilising froth
flotation. Titanium was subsequently extracted from the flotation concentrates
using an industry standard acid-bake water leach process with a 91% titanium
extraction rate.

 

·    Further optimisation of the flotation conditions is planned, aiming
to increase recovery.  Cleaner stage flotation will also be tested, in order
to increase concentrate grades.

 

Shaun Bunn, Managing Director, said: "I am extremely pleased to provide this
update on the success of the ongoing metallurgical testwork and flowsheet
development, which continues to gather great momentum. The successful
application of froth flotation to recover high-grade titanium dioxide minerals
from the fines fraction of the weathered ore is an important step in designing
an efficient and robust process flowsheet. Importantly, the titanium dioxide
minerals contained within the flotation concentrates responded well to the
subsequent leaching stage, with titanium recoveries peaking at 91%.

 

"Looking ahead, the metallurgical testwork will now focus on testing various
titanium product development options and will assess the purification and
refining stages to determine the steps required to achieve a high-purity, high
value TiO(2) product."

 

Metallurgical Testwork and Flowsheet Development

Metallurgical research and testing have been focussed on conventional
processing stages, such as gravity, flotation and acid digestion, to achieve a
cost-effective process flowsheet aimed towards producing a high-value
commercial product.

 

With the discovery of high-grade titanium dioxide minerals within the
weathered cap that extends across the entirety of this giant titanium mineral
system, the development team's focus shifted over the past several months to
testing the metallurgical and mineralogical characteristics of the weathered
ore samples. The ten diamond core drillholes from the campaign carried out in
September-October 2024 (announced 24 October 2024) provided excellent core
recovery from the weathered zone and provided representative metallurgical
samples which have accelerated the development testwork.

 

Notable testwork achievements on the weathered ore samples reported to date
include:

 

•             Slurry separation at 38 microns provides a
suitable feed for gravity and flotation feed;

•             Gravity separation recovered 60-80% of Ti-bearing
minerals into a heavy mineral concentrate;

•             Acid leach tests on gravity concentrates achieved
95% dissolution of anatase; and

•       Separate flotation test work on whole of ore samples achieved
78% TiO(2) recovery into a rougher mineral concentrate.

 

Recent XRD analysis has confirmed that the mineral assemblage within the
high-grade weathered zone is primarily titanium dioxide minerals: anatase and
rutile. Mineralogical (microprobe) analysis has also identified that the
anatase and rutile are of high purity, being very low in deleterious
contaminants.

 

The development of a process flowsheet continues to advance rapidly and the
testwork results achieved to date continue to build confidence that a
combination of gravity and flotation techniques offers a straightforward
processing method to produce a clean, anatase-rich concentrate, which can be
further upgraded via acid leaching to yield high-grade, high-purity TiO₂
(refer Figure 1.)

 

Figure 1.  Conceptual Flowsheet for the Pitfield Titanium Project.

 

Key features and benefits of the current flowsheet include:

·    Highly friable, weathered ores allow for simple, low-energy scrubbing
and desliming circuit

·    Conventional mineral separation processes (gravity/flotation) to
concentrate the Ti-bearing minerals, rejecting the gangue silicates

·    Acid leaching and precipitation to produce a high-quality TiO(2)
product (>80% TiO(2) )

·    Further refining to achieve final product (>95% TiO(2)) suitable
for:

o  Chloride pigment market and the manufacture of paints and coatings,
plastics and paper; and

o  Production of titanium metal (sponge)

 

Recent Metallurgical Testwork Results

Previously reported test work results were related to the treatment of either
whole of ore samples or the coarse fraction after a deslimes stage. Testwork
has now been undertaken on the fine fraction from the deslimes stage.

 

Drill core samples of weathered ore were crushed and then split into coarse
particle (+38 micron) and fine particle (-38 micron) fractions using a fine
wet screening process. The coarse fraction gravity and leach testwork has
previously been reported (announced 7 November 2024 and 9 December 2024
respectively). Metallurgical testing of the fine fraction from the screening
process has now commenced at ALS Metallurgy in Perth, with the initial work
focused on titanium mineral separation and concentration, followed by acid
leach extraction.

 

Mineral separation was assessed using froth flotation. A flotation "rougher"
concentrate was then taken forward for an acid bake-water leach test to
extract the titanium into solution.

 

Fines Flotation Testwork

A range of flotation conditions have been tested based on literature and
reagent vendor recommendations. Focus so far has been on conditions that have
been used in the kaolin industry for many years. In order to produce high
quality kaolin, otherwise known as "China Clay", it is quite common to remove
any anatase present as this may discolour the kaolin products. Flotation of
fine anatase has thus been common industry practice for many decades and
through the application of optimised reagent conditions it can be selectively
recovered. The initial diagnostic work tested a range of reagent conditions,
achieving a recovery high of 61% TiO(2) (Figure 2).

 

Further optimisation of the flotation conditions is planned, aiming to
increase recovery. Cleaner stage flotation will also be tested, in order to
increase concentrate grades.

 

Mineral analysis using XRD has shown that anatase is being selectively
recovered to the flotation concentrate during the froth flotation tests, with
gangue minerals such as quartz, kaolinite and smectite clays reporting to the
flotation tailing stream.

 

Additional mineral analysis using TIMA and SEM techniques are being undertaken
on the flotation concentrates and tailings stream. Further insight on mineral
recovery, liberation and association will be provided by the additional
mineralogy work.

 

 

Figure 2. Testing of the weathered ore fines samples: photo on left shows
flotation concentrate being recovered and photo on right shows the water leach
stage post acid baking of the flotation concentrate.

Acid Leach Testwork

The flotation "rougher" concentrate produced from the testwork was used to
carry out diagnostic acid leach testwork.  As in the case of the gravity
heavy mineral concentrate preliminary sighter leach testwork was carried out
using an industry standard acid bake-water leach process, conditions being
based on available literature for the leaching of anatase ores (Figure 2). A
second leach test was carried out with a pre-leach step ahead of the standard
acid bake water leach process to see the effect of removing acid consuming
gangue prior to the acid bake step. The test results were extremely
encouraging, with 82% titanium extraction being achieved for the initial
acid-bake water wash test, increasing to 91% titanium extraction with the
addition of a pre-leach step (refer Table 1).

 

Table 1. Sighter Acid-Bake Water Leach Recoveries

 Elements   Without Pre-Leach  With Pre-Leach
 Titanium   82%                91%
 Calcium    45%                86%
 Iron       75%                82%
 Magnesium  86%                88%
 Silica     3%                 1%

 

Further Work Planned in 2025

A sequence of additional resource-focused drilling, scaled-up metallurgical
testwork programmes and mining and engineering studies is planned that will
form the building blocks that are required to reach commercialisation. In
particular, the Company intends to complete:

 

·    bulk sampling and metallurgical testwork to deliver flowsheet design
and high-quality product specifications

·    engage with industry players to test product suitability for chloride
pigment and Ti sponge metal feedstock

·    in-fill drill and prepare a Maiden Resource Estimate

·    mining option studies proving low-cost potential

·    pilot plant design and commissioning, aimed at optimising the process
flowsheet and product specifications, as well as defining unit economics.

 

The Pitfield Titanium Project

Located within the Mid-West region of Western Australia, near the northern
wheatbelt town of Three Springs, the Pitfield titanium project lies 313km
north of Perth and 156km southeast of Geraldton, the Mid West region's capital
and major port. Western Australia is ranked as one of the top mining
jurisdictions in the world according to the Fraser Institute's Investment
Attractiveness Index published in 2023, and has mining-friendly policies,
stable government, transparency, and advanced technology expertise. Pitfield
has existing connections to port (both road & rail), HV power substations,
and is nearby to natural gas pipelines as well as a green energy hydrogen fuel
hub, which is under planning and development (refer Figure 4).

Figure 4. Pitfield Project Location showing the Mid-West Region Infrastructure
and Services

 

Competent Person Statement

The scientific and technical information in this report that relates to
process metallurgy is based on information reviewed by Ms. Narelle Marriott,
an employee of Empire Metals Australia Pty Ltd, a wholly owned subsidiary of
Empire. Ms. Marriott is a member of the AusIMM and has sufficient experience
relevant to the style of mineralisation and type of deposit under
consideration and to the activity being undertaken to qualify as a Competent
Person as defined in the JORC Code 2012. Ms. Marriott consents to the
inclusion in this announcement of the matters based on their information in
the form and context in which it appears.

 

The technical information in this report that relates to the geology and
exploration of the Pitfield Project has been compiled by Mr Andrew Faragher,
an employee of Empire Metals Australia Pty Ltd, a wholly owned subsidiary of
Empire. Mr. Faragher is a member of the AusIMM and has sufficient experience
that is relevant to the style of mineralisation and type of deposit under
consideration and to the activity being undertaken to qualify as a Competent
Person as defined in the JORC Code 2012. Mr Faragher consents to the inclusion
in this release of the matters based on his information in the form and
context in which it appears.

 

Market Abuse Regulation (MAR) Disclosure

Certain information contained in this announcement would have been deemed
inside information for the purposes of Article 7 of Regulation (EU) No
596/2014, as incorporated into UK law by the European Union (Withdrawal) Act
2018, until the release of this announcement.

 

**ENDS**

 

For further information please visit www.empiremetals.co.uk
(http://www.empiremetals.co.uk) or contact:

 Empire Metals Ltd

 Shaun Bunn / Greg Kuenzel / Arabella Burwell                                            Tel: 020 4583 1440
 S. P. Angel Corporate Finance LLP (Nomad & Broker)                                      Tel: 020 3470 0470

 Ewan Leggat / Adam Cowl
 Shard Capital Partners LLP (Joint Broker)                                               Tel: 020 7186 9950

 Damon Heath
 St Brides Partners Ltd (Financial                                                       Tel: 020 7236 1177
 PR)

 Susie Geliher / Charlotte Page

 

About Empire Metals Limited

Empire Metals is an AIM-listed exploration and resource development company
(LON: EEE) with a primary focus on developing Pitfield, an emerging giant
titanium project in Western Australia.

 

The high-grade titanium discovery at Pitfield is of unprecedented scale, with
airborne surveys identifying a massive, coincident gravity and magnetics
anomaly extending over 40km by 8km by 5km deep. Drill results have indicated
excellent continuity in grades and consistency of the mineralised beds and
confirm that the sandstone beds hold the higher-grade titanium dioxide
(TiO₂) values within the interbedded succession of sandstones, siltstones
and conglomerates. The Company is focused on two key prospects (Cosgrove and
Thomas), which have been identified as having thick, high-grade, near-surface,
bedded TiO₂ mineralisation, each being over 7km in strike length.

 

An Exploration Target* for Pitfield was declared in 2024, covering the Thomas
and Cosgrove mineral prospects, and was estimated to contain between 26.4 to
32.2 billion tonnes with a grade range of 4.5 to 5.5% TiO(2).  Included
within the total Exploration Target* is a subset that covers the weathered
sandstone zone, which extends from surface to an average vertical depth of 30m
to 40m and is estimated to contain between 4.0 to 4.9 billion tonnes with a
grade range of 4.8 to 5.9% TiO(2).

 

The Exploration Target* covers an area less than 20% of the overall mineral
system at Pitfield which demonstrates the potential for significant further
upside.

 

Empire is now accelerating the economic development of Pitfield, with a vision
to produce a high-value titanium metal or pigment quality product at Pitfield,
to realise the full value potential of this exceptional deposit.

 

The Company also has two further exploration projects in Australia; the
Eclipse Project and the Walton Project in Western Australia, in addition to
three precious metals projects located in a historically high-grade gold
producing region of Austria.

*The potential quantity and grade of the Exploration Target is conceptual in
nature. There has been insufficient exploration to estimate a Mineral Resource
and it is uncertain if further exploration will result in the estimation of a
Mineral Resource.

 

 

This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact
rns@lseg.com (mailto:rns@lseg.com)
 or visit
www.rns.com (http://www.rns.com/)
.

RNS may use your IP address to confirm compliance with the terms and conditions, to analyse how you engage with the information contained in this communication, and to share such analysis on an anonymised basis with others as part of our commercial services. For further information about how RNS and the London Stock Exchange use the personal data you provide us, please see our
Privacy Policy (https://www.lseg.com/privacy-and-cookie-policy)
.   END  UPDGZGMZFZNGKZM